Ball valve and gate valve are the same type of valve, the difference is that its closing part is a ball, the ball is rotated around the body core line to achieve the opening and closing of a valve. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Flange ball valve standard GB/T21465-2008 "Valve terminology" is defined as: the opening and closing parts (spheres) are driven by the valve stem and rotate around the axis of the valve stem.

Ball valve is widely used as a new type of valve, it has the following advantages:

1, the fluid resistance is small, and the resistance coefficient is equal to the pipe segment of the same length.

2, simple structure, small size, light weight.

3, tight and reliable, ball valve sealing surface material is widely used plastic, good sealing, in the vacuum system has also been widely used.

4, easy to operate, open and close quickly, from full open to full close as long as the rotation of 90 degrees, easy to remote control.

5, easy maintenance, ball valve structure is simple, the sealing ring is generally active, disassembly and replacement are more convenient.

6, when fully open or fully closed, the sealing surface of the ball and the seat is isolated from the medium, and the medium will not cause the erosion of the valve sealing surface.

7, wide range of application, small diameter to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied. This type of valve should generally be installed horizontally in the pipeline.

National Service hotline: +86-138 6830 3993

Kangong valve official website: www.kanggonggroup.com